Network cables have many advantages and are vital for laying the lines that connect computers (say corporations) into one network. Advantages of a twisted pair are many - from high throughput and to signal transmission without distortion over long distances. But there are several drawbacks, of which the most significant is the impossibility to lay the cable with bends.

Since in the room the cable has to be laid with bends (the technique does not always stay in one place and is transferred), then it is more logical to use a patch cord. Take a look at the possible options on the page https: // setevuha. ua / mednye-sistemy / patch-kordy-mednye /. This cord is highly flexible and fully compatible with Ethernet networks.

Also it is worth considering that it is issued in several types, and each version is designed to perform certain tasks:.

Direct, in which the crimping of a stranded twisted pair is performed in a straightforward manner. In fact, it is a universal connector and can be used with any network equipment;.

Cross, in which the crimp passes already with the condition of crossing. What makes it in demand in the event that it is necessary to connect different devices of the same type (for example, two computers together and one. );.

Pigtail - a classic option, when the crimp passes only on one side.

It is necessary if you need to connect a copper patch cord with an optical fiber (using welding or special adapters). Thanks to this version of the crimp, a suitable connector is easily mounted on the free end.

It is worth noting that most modern devices, when connected, recognize both the direct cable type and the cross-over. What gives greater compatibility and interchangeability of such cables. However, nevertheless, it is worth choosing the option that is right for your needs, so that there are no failures or problems during the transfer of data between devices.