Is care required for sectional gates

14 July 2018, 01:18 | real estate
photo e-news.com.ua
Text Size:

If you are planning to build a garage, you should think ahead about choosing the right gate. A very good option would be a sectional type. They are easy to use and, according to most users, almost do not need care.

And it is true. In addition, it is worth remembering that the choice is quite large - go yourself to https: // disol. com. ua / hormann /, to see this. Plus, if you take high-quality products, the gates will last for more than a dozen years.

In addition, they have several useful advantages - they are able to keep heat well (high-quality sealing) and practically do not take up any free space inside the garage or outside. All care, in principle, boils down to several preventive procedures:.

Ensure that there is no debris in the lifting mechanism, and that the guides are always clean. The mechanism should be lubricated, and the rails should be wiped with a damp cloth, especially if it's raining or snowing outside;.

For the lubrication of all moving parts, a universal lubricant WD-40 or its analogs. Thick types do not fit - they literally "collect" garbage, which will lead to big problems in the future;.

Once a month you need to process all rubber seals with a silicone-based lubricant - this will facilitate the sliding of the blade during the movement of the gate and prolong the life of the sealant;.

If you have turned off the electricity and you need to open (close) the gate, use the manual mechanism with care - do not make sudden movements, only smooth. Also, move the gate to automatic lifting mode gently, so as not to damage the connecting mechanism;.



Do not forget to conduct a regular visual inspection of all parts of the sectional door. If you notice that some element is damaged or the mechanism works "wrong" - immediately contact a specialist for professional help.

And the last - the gate always has a protective film. It should be removed immediately after installation, if the garage is not being constructed. Otherwise, the film, under the influence of sunlight, can easily stick and deform. Remove it after this will be impossible, and the appearance of the gate will suffer.




Add a comment
:D :lol: :-) ;-) 8) :-| :-* :oops: :sad: :cry: :o :-? :-x :eek: :zzz :P :roll: :sigh:
 Enter the correct answer